4 Cylinder Ignition Kits

EIS-41000 Lycoming 4cyl Electronic Ignition Kit
$2,715.00
Direct Drive ( non-impulse coupled ) Magneto Replacement

The EIS-41000 Electronic Ignition Kit is a fully STC'd kit for most Lycoming 4cyl engines. Replacing one magneto with the EIS-41000 will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000 adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000 are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems.

Kit includes: all the required parts to replace the direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming engines. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: engines are being added regularly).

For Distributor Information click here.

EIS-41000IC Lycoming and Continental 4cyl Electronic Ignition Kit
$2,945.00
Impulse Coupled Magneto Replacement

The EIS-41000IC Electronic Ignition Kit is a fully STC'd kit for most Lycoming and Continental 4cyl engines. Replacing one impulse coupled magneto with the EIS-41000IC will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, improved high altitude performance and better starting performance. The EIS-41000IC adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000IC are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Note: hand propping with an electronic ignition system is not recommended. Hand propping aircraft is a very dangerous activity and is never recommended or advisable.

Kit includes: all the required parts to replace the impulse coupled magneto (typically, the left hand mag) in most 4cyl Lycoming and Continental engines. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: engines are being added regularly).

For Distributor Information click here.

EIS-41000T Twin Engine Aircraft; Lycoming 4cyl Engines, Standard Rotation
$2,715.00
Direct Drive (non-impulse coupled) Magneto Replacement

The EIS-41000T Electronic Ignition Kit is a fully STC'd kit for most Lycoming Standard Rotation 4cyl engines installed on twin engine aircraft. Replacing one magneto with the EIS-41000T will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000T adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000T are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems.

Kit includes: all the required parts to replace one direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming, standard rotation engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. Please call Electroair Tech Support if there are ANY questions.

For Distributor Information click here.

EIS-41000TIC Twin Engine Aircraft; Lycoming 4cyl Engines, Standard Rotation
$2,945.00
Impulse Coupled Magneto Replacement

The EIS-41000TIC Electronic Ignition Kit is a fully STC'd kit for most Lycoming Standard Rotation 4cyl engines. Replacing one impulse coupled magneto with the EIS-41000TIC will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, improved high altitude performance and better starting performance. The EIS-41000TIC adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TIC are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Note: hand propping with an electronic ignition system is not recommended. Hand propping aircraft is a very dangerous activity and is never recommended or advisable.

Kit includes: all the required parts to replace one impulse coupled magneto in most 4cyl Lycoming, standard rotation engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. Please call Electroair Tech Support if there are ANY questions.

For Distributor Information click here.

EIS-41000TLH Twin Engine Aircraft; Lycoming 4cyl Engines, Counter-Rotating
$2,715.00
Direct Drive (non-impulse coupled) Magneto Replacement

The EIS-41000TLH Electronic Ignition Kit is a fully STC'd kit for most Lycoming Counter-rotating 4cyl engines installed on twin engine aircraft. Replacing one magneto with the EIS-41000TLH will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-41000TLH adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TLH are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems.

Kit includes: all the required parts to replace one direct drive magneto (typically, the right hand mag) in most 4cyl Lycoming engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). ). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. Please call Electroair Tech Support if there are ANY questions.

For Distributor Information click here.

EIS-41000TLHIC Twin Engine Aircraft; Lycoming 4cyl
$2,945.00
Impulse Coupled Magneto Replacement

The EIS-41000TLHIC Electronic Ignition Kit is a fully STC'd kit for most Lycoming Counter Rotating 4cyl engines. Replacing one impulse coupled magneto with the EIS-41000TLHIC will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, improved high altitude performance and better starting performance. The EIS-41000TLHIC adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-41000TLHIC are not life limited (the MTH is recommended to be changed at overhaul of the engine; spark plug wires on a regular interval) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems. Note: hand propping with an electronic ignition system is not recommended. Hand propping aircraft is a very dangerous activity and is never recommended or advisable.

Kit includes: all the required parts to replace one impulse coupled magneto in most 4cyl Lycoming, counter rotating engines installed on twin engine aircraft. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: aircraft & engines are being added regularly). You will have to order two kits in order to completely convert a Twin Engine Aircraft – please verify whether or not your aircraft has counter rotating props to make sure you order the correct kit. Please call Electroair Tech Support if there are ANY questions.

For Distributor Information click here.

The EIS-42000DM Electronic Ignition Kit
4cyl EIS; Bendix Single Drive, Dual Mag $5,200.00

The EIS-42000D Electronic Ignition Kit is a fully STC'd kit to replace the Bendix single drive, dual magneto with a complete, DUAL ELECTRONIC ignition. The two ignition systems are completely independent of each other and do not have any common failure modes. Replacing the dual magneto with the EIS-42000D will typically improve fuel economy on average by 10-15% (many operators have reported consistent fuel savings of 1gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, and improved high altitude performance. The EIS-42000D adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. This kit can be used on either 12V or 24V systems. Supplemental back-up power is required.

This kit eliminates A.D. Notes. eliminates repetitive inspections, and improves performance.

Kit includes: all the required parts to replace the Bendix single drive, dual magneto used in some Lycoming engines. (Please refer to the eligibility schedule to verify the system can be installed on your engine - Note: engines are being added regularly).

CORE CHARGE: $1,000.00; refundable upon return of good core removed from aircraft. For Distributor Information click here.